Заказать и купить изделие «Дифманометр ДМЭ-МИ» от производителя в Спб, Москве.

Differential pressure gauge DME-MI - measuring transducers with compensation of magnetic fluxes are designed to measure flow rate, differential pressure, level and convert the measured parameter into a unified current signal. The devices are earthquake resistant. Differential pressure gauge DME-MI technical characteristics The device is operable in the version in the ambient temperature range from +15 to +35 ° C and in the version UHL 4.2 in the temperature range from +5 to 60 ° C. Differential pressure gauges can operate at subzero temperatures, if condensate freezing in impulse lines, valve block, and measuring block is excluded. accuracy class 1.5 supply voltage 220V; 50Hz; limit 4kgf / cm2; output signal 0.5mA; The permissible relative air humidity of the DME-MI differential pressure gauge is 95% at a temperature of + 35 ° C and lower temperatures, without moisture condensation. Values ​​of current outputs 0-5, 4-20 for DME-MI and DMER-MI. 5-0 mA, 20-4 mA for DMEU-MI. The products are earthquake resistant. The devices are operable in the version in the ambient temperature range from +15 to +35 ° C and in the UHL 4.2 version in the temperature range from +5 to 60 ° C. Permissible relative humidity 95% at + 35 ° C and lower temperatures, no moisture condensation. Power consumption for differential pressure gauges with an output signal: • 0-5 (5-0) mA no more than 5 VA; • 4-20 (20-4) mA no more than 6 VA Differential pressure gauges DME-MI can be used in a set with secondary devices and other automation and control devices in control systems operating from a standard input signal 0-5 or 4-20 mA. Power is supplied from an alternating current with a voltage of 220 V and a frequency of 50 Hz. Flow rate units: kg / h; t / h; m 3 / h; l / h