Заказать и купить изделие «Прибор комбинированный Ц 4353» от производителя в Спб, Москве.

The combined device Ts 4353 is designed to measure the strength and voltage of direct and alternating current, resistance to direct current, capacitance and the relative level of transmission of alternating voltage. The device measures the average value of an alternating current or voltage, but is calibrated in rms (effective) values ​​with an almost sinusoidal waveform. It is used to measure the parameters of electrical circuits of electrical and radio engineering devices in various sectors of the national economy. The measuring mechanism of a magnetoelectric system with an intra-frame magnet. The Ts4353 device is used to measure the strength and voltage of a direct current, the rms value of the strength and voltage of an alternating current of a sinusoidal form, resistance to direct current, electrical capacity, and the absolute level of the signal for the voltage of alternating current in electrical circuits. Ts4353 technical characteristics Accuracy class for measurements: DC: 1.5; AC: 2.5. Sinusoidal distortion factor: 1.11. The number of measurement limits: 38. Input resistance of the voltmeter: DC: 20 kOhm / V; on alternating current: 2 kOhm / V. Frequency range of Ts4353: 45… 5000 Hz. MTBF: 6250 hours. Average service life: 6 years. Working position: horizontal. Ambient temperature: -10 ... +40 ° С; relative humidity: 90% at 30 ° C. Ts4353 limits of DC current measurement: 0.06 ... 1500 mA; DC voltage: 0.075 ... 600 V; AC current: 0.6 ... 1500 mA; AC voltage Ts4353: 1.5 ... 600 V; DC resistance: 0.3 ... 10000 kOhm; capacitance: 0.5 microfarad.